How to Pick a Lock With a Pin: a Beginner’s Guide

To learn how to pick a lock with a bobby pin, read on. Using bobby pins, construct a pick and a lever. The bottom of the keyhole should have the lever on it. Turn it like a key. Insert the pick with the bent end in. Find the stuck pins and push them. Open the door by pulling the handle.

If you follow the right procedures, picking a lock with a bobby pin is not a difficult task. You don’t have to pay someone to assist you in entering your home. Instead, a hair pin lock pick can assist you in entering. Find out more about the best lock pick kits for beginners right here.

What You Need

You need a few specific things before you can use a hairpin to pick a lock. Finding these things is simple. Inside your toolbox, you can easily locate them. If you don’t already have these things, you can buy them online or at the neighborhood store.

Bobby Pins

For you to successfully open the door, the bobby pins will act as a pick and a lever. To avoid breaking once you begin picking the lock, choose bobby pins that are sturdy. Your lock’s size will also affect how big the bobby pins should be. Ensure that they would fit inside without a problem.

Use a wire cutter or your teeth to remove any rubber knobs that the bobby pins have on the end. This will help you move the pick freely while preventing the pick and the lever from getting stuck inside the lock.

If you don’t have any bobby pins, you can also use two paper clips. The most preferred ones are those made of metal because you can pick locks without worrying about them breaking by using them. They must also be flexible in order to be bent.

A metal wire is another alternative. They must, however, be thick enough to push the pins without breaking or becoming stuck inside the lock. Simply use caution when handling them to avoid cuts.

Pliers

You’ll need a pair of pliers so that you can easily bend the bobby pins. A set of needle-nose pliers works best for bending metal wires. In jewelry bending and other handicrafts, it is frequently used. It is important to choose needle-nose pliers with a comfortable handle so that you can have a secure grip on them.

You can also bend the bobby pins with your hands if you don’t have any pliers. However, it might require some time and work. Additionally, take care when bending them to avoid getting any cuts.

Wire Cutter

The rubber knobs on the bobby pins must be taken off with a wire cutter. There are numerous varieties of wire cutters available. A pair of shear cutters is among them. On metal wires, it can cut them with the greatest smoothness. Avoid applying excessive pressure, though, as this could blunt the cutter’s blades.

Shear cutters are not the only option; side cutters are also an option. It is frequently employed to cut copper and aluminum. The only drawback is that after cutting through the metal, it may leave a sharp spike.

Gloves (optional)

If your hands are sweaty or wet, wearing a pair of gloves can help you maintain your grip. Furthermore, if the pick were to slip from your hands, it could shield you from any cuts. To avoid any problems while working through the tutorial, you must pick the proper kind of gloves.

Use non-latex gloves if you are allergic to latex. Additionally acceptable are leather gloves due to their light weight and ability to provide a secure grip. Additionally, the gloves need to be the perfect size for your hands; neither too tight nor too loose as these conditions would distract you from wearing them.

How to Pick a Lock With a Pin

Step 1: Create a Lever and a Pick Using Bobby Pins

By bending a pin back until it resembles a length of metal wire, you can make a pick. Put the pick inside the lock for one centimeter. The flat side must be facing up. Bend the pin’s tip just a little and then push the rest of it to the left. Make a loop out of the pick’s opposite side.

Bend the other pin’s other half at a right angle with a pair of pliers to create the lever. Its function is to act as a key, making it simpler for the pick to push the pins at the same height.

Step 2: Place the Lever in the Bottom Part of the Keyhole Then Turn It Like a Key

Put the lever’s bent end on the bottom of the keyhole. As low and deeply as you can, position it. As if turning a key, gently turn the lever. Try both directions if you’re not sure which way to go. A clicking sound will be produced if the lever is positioned incorrectly.

The lever must be in this position throughout the process. You must exert pressure, but it shouldn’t be excessive. You’ll have a hard time pushing the pins up if you squeeze the lever up against the lock.

Step 3: Insert the Pick With a Bent End and Feel the Pins

Now, insert your pick’s bent end and feel for the pins by moving it up and down. To tell which pins are jammed and which are not, make sure you have felt every one of them. You are pressing too hard on your lever if the pins make no movement at all. Try to reduce the pressure.

Step 4: Look for the Jammed Pin and Push It Up

Once you have identified the moving pins, search for the pin that is stuck. Pushing the seized pin upward requires constant pressure on the lever. Once the split portion of the pin aligns with the barrel and is no longer in the way, you will hear a clicking sound.

Step 5: Repeat the Process for Other Jammed Pins

Some of the other pins may seize up after one pin moves out of the way. You can use this to determine which pin to push up next. When your lever can turn the lock all the way and successfully open the door, repeat the procedure you used for the first pin.

Conclusion

I want to address two issues before I wrap up this bobby pin lock picking guide.

The first is that you should never use these abilities maliciously and should only apply them to locks that you own or that you have permission to use.

Regarding your locks, second. It is strongly advised against practicing on locks that you must use, such as the deadbolt on your front door. They might sustain lasting harm if you do that. It is advised that you purchase or salvage practice locks for your use.

Additionally, if you enjoy this hobby while picking locks with paperclips or bobby pins, you might think about purchasing a real set of lock picks. Having the right tools will greatly increase your success in picking locks and honing your skills, and they are a very inexpensive investment.

FAQs